|
|
 |
 |
 |
 |
 |
| Coaxial Circulators Narrow Bandwidth Models |
 |
The following table outlines our standard selection of narrow bandwidth circulators, but by no means does it indicate the limits of our capabilities in the product line. |
Model |
Frequency Range (GHz) |
Impedance (Ohms) |
Insertion Loss (dB Max.) |
VSWR (Max.) |
C-1.485/0.1-X |
1.434 - 1.535 |
50 |
0.20 |
1.15:1 |
C-1.70/0.1-X |
1.65 - 1.75 |
50 |
0.20 |
1.15:1 |
C-2.25/0.1-X |
2.20 - 2.30 |
50 |
0.12 |
1.12:1 |
C-2.3/0.2-X |
2.20 - 2.40 |
50 |
0.20 |
1.12:1 |
C-2.6/0.2-X |
2.50 - 2.70 |
50 |
0.15 |
1.15:1 |
C-2.8/0.2-X |
2.70 - 2.90 |
50 |
0.15 |
1.15:1 |
C-3.3/0.4-X |
3.10 - 3.50 |
50 |
0.15 |
1.15:1 |
C-3.95/0.5-X |
3.70 - 4.20 |
50 |
0.15 |
1.15:1 |
C-4.7/0.6-X |
4.40 - 5.00 |
50 |
0.15 |
1.15:1 |
C-5.15/0.5-X |
4.90 - 5.40 |
50 |
0.15 |
1.15:1 |
C-5.65/0.5-X |
5.40 - 5.90 |
50 |
0.15 |
1.15:1 |
C-6.18/0.5-X |
5.93 - 6.43 |
50 |
0.15 |
1.15:1 |
C-7.5/0.5-X |
7.25 - 7.75 |
50 |
0.15 |
1.15:1 |
C-8.15/0.5-X |
7.90 - 8.40 |
50 |
0.15 |
1.15:1 |
C-9.6/0.8-X |
9.20 - 10.0 |
50 |
0.15 |
1.15:1 |
C-11.15/0.5-X |
10.90 - 11.40 |
50 |
0.15 |
1.15:1 |
C-11.95/0.5-X |
11.70 - 12.20 |
50 |
0.20 |
1.15:1 |
C-12.45/0.5-X |
12.20 - 12.70 |
50 |
0.20 |
1.15:1 |
C-14.25/0.5-X |
14.00 - 14.50 |
50 |
0.25 |
1.15:1 |
C-15.5/1.0-X |
15.00 - 16.00 |
50 |
0.30 |
1.15:1 |
C-16.5/1.0-X |
16.00 - 17.00 |
50 |
0.30 |
1.15:1 |
C-17.5/1.0-X |
17.00 - 18.00 |
50 |
0.30 |
1.15:1 |
C-19.0/2.0-X |
18.00 - 20.00 |
50 |
0.45 |
1.25:1 |
C-21.0/2.0-X |
20.00 - 22.00 |
50 |
0.45 |
1.25:1 |
C-31.5/2.0-X |
29.00 - 31.00 |
50 |
0.50 |
1.25:1 |
Standard connectors are SMA female. Type N, 2.92mm, 3.5mm and 7/16 DIN connectors are also available.
To order SMA Female connectors on any unit, replace the 'X' in the model number with 'S'. To order Type N Female connectors on any unit, replace the 'X' in the model number with' N'. To order 2.92mm Female connectors on any unit, replace the 'X' in the model number with '2'. To order 3.5mm Female connectors on any unit, replace the 'X' in the model number with '3'. To order 7/16 DIN Female connectors on any unit, replace the 'X' in the model number with 'D7'. Note: Unit isolation is equal to the match on port 3. Example: If port 3 return loss = 20 dB, then isolation = 20 dB. To inquire about other connector options or performance specifications, please consult the factory. |
||||
Narrow Bandwidth Isolators Page
Back to Isolators / Circulators Page
